Fountain Maintenance Tips

If you have a garden fountain, you have a great place to relax and get in touch with nature.  There is nothing more peaceful than sitting by a fountain and relaxing after a long day at work.  While garden fountains can provide a relaxing environment, they do have maintenance needs that have to be taken care of.

If you want to keep your fountain running correctly for as long as possible, you need to have a maintenance schedule that you stick to.  While you have this schedule, you also need to know some maintenance tips that can help.  These tips will ensure your fountain brings you relaxation and pleasure for many years.

Have The Right Water Level

One of the most important maintenance tips is to keep the water level at the right point.  The pump of your fountain needs to be fully submerged in water.  If the level is too low, the pump will not be able to work correctly and will become damaged.  The water level needs to be looked at regularly, particularly during the hot summer months.

Protect The Fountain Surface

The use of a sealer will help to protect the surface of the fountain.  The frequency of applying sealer will vary depending on the type of fountain you have and where it is located.  The application of sealer is generally something to be done every few years because it increases the fountain’s lifespan.

If you don’t yet have a water fountain read about the top Henri outdoor water fountains.

Clean The Fountain

You need to take the time to properly clean your fountain.  You should use a non-abrasive cloth to clean the sides and this needs to be done regularly.  The cleaning will remove any dirt, dust, and pollen from the fountain and keep it looking its best.

When you clean the fountain, you should follow the directions set out by the manufacturer.  This will be found in your instruction manual.  Only use the cleaning agents specified as other cleaners could damage the fountain.

Keep Turned Off Pumps Out Of Water

When you turn off the pump, you should not leave it sitting in water for a prolonged period.  This will increase the charges of algae growth and corrosion in the pump.  Leaving the pump running is recommended as it keeps the fountain water clean and extends the life of the pump.

While keeping the pump running is recommended, you may need to periodically take it out of the fountain and place it in a solution of vinegar and water.  This solution should be 2 parts vinegar to 1-part water.  This will clean out the pump lines and ensure that it runs as effectively as possible.

Use The Right Cleaners

When cleaning the fountain, you should keep all your furry and feathered friends in mind.  Use cleaners that are eco-friendly to reduce the impact they have on animals.

Keep Plant Growth Away

While you need to remove any plant fragments and twigs from the water to avid them clogging the pump, this is not the only plant issue you need to know.  Plants and weeds should be kept away from the edge of the pond.


Click Here to Leave a Comment Below 0 comments

Leave a Reply: